Hunter Flowclik Sensor & Interface Panel

Automatically shuts down system if an overflow condition occurs

A ruptured pipe or broken sprinkler left undetected can result in substantial damage. Plants and ground cover can be flooded, and slopes can be eroded. The Flow-Clik can help identify a break before any damage can occur. The Flow-Clik can be programmed at a specific level of flow; once that level is exceeded, the electrical circuit is broken and the valves are shut off. The ammount of water loss in the event of high external leakage is substantially reduced.

Features and Benefits:

• Compatible with all commercial and residential piping systems: Large flow range provides complete flexibility
• Customized calibration for precise system control: Every irrigation system is set individually with a single push button
• Multi-color LED provides system status: Displays if power is applied and whether flow is acceptable
36" leads provided for easy wiring to controller (2 wires to controller 24VAC terminals and 2 wires to sensor and terminals)
• Programmable start up delay (0-300 Seconds)
• Programmable interrupt period (2-60 minutes)
• System status indicator light
• One button system calibration to highest flow zone

Electrical Specifications

• Current draw: @24VAC .025 Amps
• Switching current: 2.0 Amps
• Maximun distance between interface panel and sensor = 1000 ft. (18 gauge minimum wire size) 2 wires required for Flow-Clik Sensor, 4 wires required for Flow-Clik IMMS Sensor to IMMS Interface