You have no items in your shopping cart.
Product Description
The Hunter MPR 40 spray body is perfectly designed to work with Hunter Rotator Nozzles. The Hunter MPR-40 has a built in pressure regulator and check valve insuring that the optimal 40 psi is consistently reached at every head. When combined with the Hunter MP40 Hunter's MP Rotators will perform at their best. The Hunter MPR-40 includes all the high-quality advances of the rest of Hunter's line of pop-up spray bodies and can be relied on to deliver a solid dependable performance.
What Makes Hunter Sprinklers the Easiest to Adjust?
The new two-piece ratchet design—with independent ratcheting ring—facilitates quicker, more precise sprinkler head adjustment. With its tough-as-nails, abrasion resistant, high impact material, it withstands any impact in higher pressure systems. Incredibly dirt tolerant, too. What more can we say?
The Wiper Seal that Works
The MPR40’s pressure activated, multifunction wiper seal has been designed to reduce flow-by. The zero flush seal gives you surefire operation at low pressures and enables more sprinkler heads on the same zone. The wiper seal is designed to grip the riser when operating and keep debris out of the seal when retracted. No more body cap leaks either. Put debris in its place, and end riser stick-ups.
Dimensions
• Overall height: MPR40-04-CV – 57/8" (15.5 cm)
• ½" female inlet NPT
• Exposed diameter: 2¼" (5.7 cm)
Operating Specifications
• Recommended pressure range: 15 to 100 PSI (1.0 to 6.9 bars; 103 to 689 kPa)
• Flow-by: 0 at 10 PSI (0.7 bars; 68 kPa) or greater; 0.1 GPM (0.02 m3/hr; 0.4 l/min) otherwise
• Check height: Up to 14’ (4.3 m) elevation change Options Available
• Field-installed black rubber cover (part # 469805)
• Field-installed reclaimed water identification snap-on cover (part # PROSRCCAP
• Field-installed reclaimed water identification body cap (part # 458545)
• Field-installed vandal-proof cap (part # INST-VPC)
What Makes Hunter Sprinklers the Easiest to Adjust?
The new two-piece ratchet design—with independent ratcheting ring—facilitates quicker, more precise sprinkler head adjustment. With its tough-as-nails, abrasion resistant, high impact material, it withstands any impact in higher pressure systems. Incredibly dirt tolerant, too. What more can we say?
The Wiper Seal that Works
The MPR40’s pressure activated, multifunction wiper seal has been designed to reduce flow-by. The zero flush seal gives you surefire operation at low pressures and enables more sprinkler heads on the same zone. The wiper seal is designed to grip the riser when operating and keep debris out of the seal when retracted. No more body cap leaks either. Put debris in its place, and end riser stick-ups.
Dimensions
• Overall height: MPR40-04-CV – 57/8" (15.5 cm)
• ½" female inlet NPT
• Exposed diameter: 2¼" (5.7 cm)
Operating Specifications
• Recommended pressure range: 15 to 100 PSI (1.0 to 6.9 bars; 103 to 689 kPa)
• Flow-by: 0 at 10 PSI (0.7 bars; 68 kPa) or greater; 0.1 GPM (0.02 m3/hr; 0.4 l/min) otherwise
• Check height: Up to 14’ (4.3 m) elevation change Options Available
• Field-installed black rubber cover (part # 469805)
• Field-installed reclaimed water identification snap-on cover (part # PROSRCCAP
• Field-installed reclaimed water identification body cap (part # 458545)
• Field-installed vandal-proof cap (part # INST-VPC)
Product Tags
Add Your Tags:
Use spaces to separate tags. Use single quotes (') for phrases.
