Hunter X-Core 800i 8 Station Indoor Controller

Note: The XC 800i model is a comparable replacement upgrade of the EC models.
Hunter X-Core 800i presents handy water management control in a compact, user-friendly controller that is capable of meeting the irrigation requirements for a wide range of residential landscapes. Simply put, the 8 station indoor Hunter X-Core controller brings a whole lot extra to a small controller. Like extra power, the Hunter XCore 800i station model has plenty of might to operate one or two valves per station plus a pump start relay or master valve. Extra features include; global seasonal adjustment and a 365-day calendar to make water savings easier, plus a default system that permits retrieval of the original program entered into the controller. Extra flexibility with three programs (each with four start times), multiple scheduling formats, and the ability to select sensor input by station. And extra memory with a non-volatile on-board program backup and a high-energy lithium battery for timekeeping to assure you’ll never have to reprogram the controller due to power outages. For those who demand outstanding reliability, the Hunter X-Core 800 is where to turn for extra peace of mind.

Features, Benefits and Specifications include:
• Outdoor models, transformer with internal junction box
• Indoor models, 120VAC plug-in transformer
• 3 programs, A, B, C
• Start times: 4 per day, per program for up to 12 daily starts
• Station run time: 0 minutes to 4 hours in 1-minute increments
• Day schedule: 7-day calendar or true odd/even programming with 365-day calendar clock
• AM/PM or 24 hour clock option
• Automated chronological ordering of start times/ start time stacking
• One-button manual start and advance
• Seasonal adjust: 0% to 150%
• Transformer input: 110VAC, 60 Hz
• Transformer output: 24VAC, 1.0 amps (capable of operating equivalent of 3 solenoids simultaneously)
• Station output: .56 amps
• Electronic short circuit detection
• Battery: 3V lithium (included) for remote programming and timekeeping, not required for
program backup
• Programmable delay between stations
• Rain sensor bypass switch compatible with microswitch based sensors, displays when sensor is active
• Programmable sensor input by station
• Original program can be saved in non-volatile memory and retrieved later if needed
• Programmable rain delay from 1 to 7 days
• Programmable event day off allows specific day(s) to be designated as always “off ”
• Hunter Quick Check™ helps troubleshoot field wiring issues
• Test program feature allows for quick system checks
• UL/CE listed

Dimensions
• Height: 5-1/2"
• Width: 5-3/4"
• Depth: 2"