




|
Shipping By UPS
|

|

|
Wet Area Around the Sprinkler - Hunter
Tags:
Troubleshooting, Rotors, Spray Heads, Hunter, Sprinklers
|
There are two reasons why there might be a wet spot around your sprinkler:
- The most common reason is called “Low Head Drainage.” This is when the lowest sprinkler head on the zone leaks the water from the pipe. Eventually, the water leak will stop after all the water has leaked out of the pipe. To fix low head drainage, install check valves on the sprinklers or in areas with extreme elevation change, you may need an HCV underneath the sprinklers exhibiting this issue.
- Another reason may be water leaking through the valve. Note: a check valve in the sprinkler will not fix this leak. Typically, water will leak through a valve because debris is in the valve. To fix this, you’ll need to disassemble the valve, rinse all the parts with clean water, and re-assemble the valve. If you cannot locate your valve boxes or fix the valve, it is recommended you contact the contractor who installed the sprinkler system or find a professional contractor in your area.
Provided by Hunter Industries
|
|

|
|

|

|

Qty
|
 |

Description
|

1 EA
|
 |

Hunter PGP Blue Nozzle Set *NEW*
|

8 EA
|
 |

Hunter SS-530 Side Strip Nozzle 5' x 30' Coverage
|

6 EA
|
 |

Hunter RCS-515 Right Corner Strip 5' x 15' coverage
|

4 EA
|
 |

Hunter LCS-515 Left Corner Strip 5' x 15' coverage
|
Go To Cart...
|
|
|

|