Installing Drip Emitters and Tubing

Use the punch tool to easily create holes for emmitters or 1/4" tubing.	The opposite end of the Yellow Punch Tool makes it easy to install 1/4" drip fittings without hurting your fingers.
To branch off of 1/2" poly pipe, install a 1/4" insert coupler and connect it to 1/4" distribution tubing.	Install point-source drip emitters at the end of 1/4" tubing.
Micro Sprays mounted on stakes can also be connected to 1/2" poly pipe with a 1/4" insert coupler.	Close off the end of the 1/2" poly pipe with a Figure 8 fitting.

Emitters can either be installed directly in 1/2"
poly pipe or on 1/4" tubing for more precise watering.